FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2017 Threads] LPc18xx EMAC with LPCOpen Posted by koenvda on February 16, 2017 Hi,
I'm implementing FreeRTOS plus UDP on a LPC1830. As the network interface i want to use the LPCOpen Library which are include in the FreeRTOS-Plus-UDP lib. But i am struggling to use the lpc18xx43xxEMAC_LPCOpen files error free in the project. Is there a guide or maybe a new demo because the include demo is using the CMSISv2.10 DriverLib.
Koen Van der Aa
LPc18xx EMAC with LPCOpen Posted by heinbali01 on February 17, 2017 Hi Koen,
FreeRTOS-Plus-UDP receives less of our attention because it has been replaced/upgraded by the more complete FreeRTOS+TCP.
It comes with a LPC18xx driver (NetworkInterface.c) that should work well. You can download the demo FreeRTOS_Plus_TCP_and_CLI_LPC1830_CrossWorks_LPCXpresso and see how the project is setup.
If you find problem with that solution, please let it know.
LPc18xx EMAC with LPCOpen Posted by koenvda on February 17, 2017 Hi Hein,
Thanks for the reaction but where can i find the demo project?
LPc18xx EMAC with LPCOpen Posted by heinbali01 on February 17, 2017 You can download the FreeRTOS+TCP sources from http://www.freertos.org/FreeRTOS-Plus/FreeRTOSPlusTCP/index.html
You will find the demo in FreeRTOS-Plus/Demo/FreeRTOS_Plus_TCP_and_CLI_LPC1830_CrossWorks_LPCXpresso
The latest kernel is included in the ZIP file. Or you can use any of the newer kernels, 8.2 or higher.
LPc18xx EMAC with LPCOpen Posted by koenvda on February 17, 2017 If i donwload the sources there is no LPC1830 demo inside it. There are only TCP and FAT demos but not for the LPC1830. I don't see the TCP and CLI files.
LPc18xx EMAC with LPCOpen Posted by heinbali01 on February 18, 2017 Oops, you're right!
It has not been added to the ZIP. I'm not sure for what reason.
Would you mind to send me an email ( h point tibosch (at) freertos point org ), then I'll send you the demo project and help you get through it. I do have an LPCXpresso board, but it's been a while that I tested mentioned demo. Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|