FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [April 2009 Threads] Porting to Olimex LPC-E2468Posted by Chris Pesto on April 10, 2009 Hi everyone. I'm need to port the FreeRTOS/uIP webserver demo for the LPC2368 included in the FreeRTOS demo to the Olimex LPC-E2468 board. I'm pretty sure this is not a difficult thing to do and doesn't require many changes (the webserver demo even uses the same LPC23xx.h header file that some existing demos for my board use) but I just don't know where to start.
Can anybody point me in the right direction? Do I just need to edit emac.c somewhere? It's not an uncommon development board; maybe somebody's done this already?
Thanks a lot for any help!
RE: Porting to Olimex LPC-E2468Posted by Dave on April 11, 2009 http://www.freertos.org/porting-a-freertos-demo-to-different-hardware.html
Check if the PHY used on the two boards are the same or not. This might be where you have to make some changes.
RE: Porting to Olimex LPC-E2468Posted by Chris Pesto on April 11, 2009 Thanks! I'll check that out.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|