|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
Update of Xilinx PowerPC (PPC405) PortPosted by CHUAN on April 6, 2012 Hi The demo "Xilinx PowerPC (PPC405) Port" uses functions in "Xilinx Board Support Package" (BSP) as part of its portable ports. However, some functions are not referenced in the BSP, resulting in the failure in linking. e.g. XIntc_mGetIntrStatus (seems to be interrupt funciton in BSP) I guess, the BSP is updated therefore not compitable with the FreeRTOS now So, which EDK version is FreeRTOS using in this demo? Any solutions? Thanks in advance Sean RE: Update of Xilinx PowerPC (PPC405) PortPosted by Richard on April 7, 2012 I can't remember, but I think it was version 6 or 9, not that that helps you much. Both Xilinx PowerPC ports are not going to be updated again, as Xilinx are not updating their PPC products. The Xilinx MicroBlaze port and demo have both recently been updated to the latest (13?) ISE version, and there is a new Xilinx Zynq port as these are the two Xilinx lines being actively developed. Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
