FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [February 2010 Threads] CORTEX_STM32F107_GCC_Rowley ??Posted by fkb on February 28, 2010 Hi Folks...
Anybody have this project up and running in Cross Studio 2 ??
best reg Finn
RE: CORTEX_STM32F107_GCC_Rowley ??Posted by MEdwards on March 1, 2010 Are you having an issue with it? I would have thought it would just open in V2. If you are having an issue, what is it?
RE: CORTEX_STM32F107_GCC_Rowley ??Posted by adrien on March 2, 2010 I have just compiled the from FreeRTOS v6.02 without problems.
The software runs in the target board, but it seems that the web-server doesn't work at all. The board doesn't responds to the pings too.
Adrien.
RE: CORTEX_STM32F107_GCC_Rowley ??Posted by fkb on March 2, 2010 Hi there...
I downloaded the files, i Compiled them and that works fine. (i use CrossStudio 2.0)
I CAN'T download to target, with the JTAG.
If you check the target processor, you will se, that the target is '103..... you can't select '107
I did change the RTOSDemo.hzp, to use the STM32 target instead of the ST_STM32F10x taget files. With some changes to the startup file, i got the project in a "compilable" and "downloadable" state.... with the '107 as target....
but.... when i start the app. it crashes... i traced the problem to when the "void vTaskStartScheduler( void )" starts. im not into the details, but it seems that the xTaskCreate macro shomehow f***s up....
im not much into the ASM of the ARM, so it's not easy for mee to see what goes wrong....
hope the helps....
best reg Finn
RE: CORTEX_STM32F107_GCC_Rowley ??Posted by adrien on March 3, 2010 I was using CrossStudio 2.0.4. I am sorry not to be able to help more. My cross studio licence has just expired … I have also seen, that this project has the wrong target by default (I didn't change it).
I don't use this project any more because I find it not stable enough for my needs.
Regards,
Adrien.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|