FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [July 2008 Threads] FreeRTOS port on Freescale MPC5516Posted by SimFr on July 26, 2008 I plan to port the FreeRTOS on a MPC5516 from Freescale, which is a Dualcore-controller and has a PowerPC-architecture. As a first step I will port FreeRTOS to one of the two cores (e200Z1), after that to the second core (e200Z0). As a second step I would like to couple the two ports.
Therfore I would like to enquire, if someone is untertaking/undertook the same or a similar attempt with another Freescale MPC?
Thank you very much in advance!
RE: FreeRTOS port on Freescale MPC5516Posted by MEdwards on July 26, 2008 Assume you have seen this
http://www.freertos.org/Free-RTOS-PPC405-Xilinx-Virtex4.html
dont know if it helps.
RE: FreeRTOS port on Freescale MPC5516Posted by SimFr on July 27, 2008 Thank you!
Yes, I already have seen this port. I´m about to check if this is a good starting point for a port to the MPC5516.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|