FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [July 2017 Threads]
Hello,
I am working with a Zynq-7000 and FreeRTOS 8.2.3. I would like to enable nested interrupts but I am experiencing some problems.
As Xilinx AR54128 (https://www.xilinx.com/support/answers/54128.html) says, I call XScuGicCPUWriteReg(IntcInstancePtr, XSCGICBINPTOFFSET,0x03) during the interrupt controller initialization, before the XilExceptionInit().
Then, my ISR routine is something like this:
~~~
void Handler()
{
BaseTypet xTaskWokenByReceive = pdFALSE;
BaseTypet xHigherPriorityTaskWoken = pdFALSE;
Xil_EnableNestedInterrupts();
if(xQueueReceiveFromISR(<argA>, <argB>, &xTaskWokenByReceive) == pdTRUE)
{
vTaskNotifyGiveFromISR(<argC>, &xHigherPriorityTaskWoken);
}
else if(xQueueReceiveFromISR(<argD>, <argE>, &xTaskWokenByReceive) == pdTRUE)
{
vTaskNotifyGiveFromISR(<argF>, &xHigherPriorityTaskWoken);
}
else
{
// Do nothing
}
/* If xHigherPriorityTaskWoken is now set to pdTRUE then a context switch
* should be performed to ensure the interrupt returns directly to the highest
* priority task. The macro used for this purpose is dependent on the port in
* use and may be called portENDSWITCHINGISR().
*/
XilDisableNestedInterrupts();
portYIELDFROMISR(xHigherPriorityTaskWoken);
}
~~~
The priority of the related interrupt is equal to configMAXAPICALLINTERRUPT_PRIORITY.
During the execution I get two assert errors:
- Assert failed in file port.c, line 539
- Assert failed in file port.c, line 424
The first one comes from the first configASSERT of the function vPortValidateInterruptPriority():
~~~
void vPortValidateInterruptPriority( void )
{
/* The following assertion will fail if a service routine (ISR) for
an interrupt that has been assigned a priority above
configMAXSYSCALLINTERRUPTPRIORITY calls an ISR safe FreeRTOS API
function. ISR safe FreeRTOS API functions must only be called
from interrupts that have been assigned a priority at or below
configMAXSYSCALLINTERRUPTPRIORITY.
Numerically low interrupt priority numbers represent logically high
interrupt priorities, therefore the priority of the interrupt must
be set to a value equal to or numerically *higher* than
configMAX_SYSCALL_INTERRUPT_PRIORITY.
FreeRTOS maintains separate thread and ISR API functions to ensure
interrupt entry is as fast and simple as possible. */
configASSERT( portICCRPR_RUNNING_PRIORITY_REGISTER >= ( uint32_t ) ( configMAX_API_CALL_INTERRUPT_PRIORITY << portPRIORITY_SHIFT ) );
/* Priority grouping: The interrupt controller (GIC) allows the bits
that define each interrupt's priority to be split between bits that
define the interrupt's pre-emption priority bits and bits that define
the interrupt's sub-priority. For simplicity all bits must be defined
to be pre-emption priority bits. The following assertion will fail if
this is not the case (if some bits represent a sub-priority).
The priority grouping is configured by the GIC's binary point register
(ICCBPR). Writting 0 to ICCBPR will ensure it is set to its lowest
possible value (which may be above 0). */
configASSERT( ( portICCBPR_BINARY_POINT_REGISTER & portBINARY_POINT_BITS ) <= portMAX_BINARY_POINT_VALUE );
}
~~~
The second one from the last configASSERT of the function vPortEnterCritical():
~~~
void vPortEnterCritical( void )
{
/* Mask interrupts up to the max syscall interrupt priority. */
ulPortSetInterruptMask();
/* Now interrupts are disabled ulCriticalNesting can be accessed
directly. Increment ulCriticalNesting to keep a count of how many times
portENTER_CRITICAL() has been called. */
ulCriticalNesting++;
/* This is not the interrupt safe version of the enter critical function so
assert() if it is being called from an interrupt context. Only API
functions that end in "FromISR" can be used in an interrupt. Only assert if
the critical nesting count is 1 to protect against recursive calls if the
assert function also uses a critical section. */
if( ulCriticalNesting == 1 )
{
configASSERT( ulPortInterruptNesting == 0 );
}
}
~~~
Does anyone know why I get those errors?
Am I making some mistakes while setting the interrupt's priority?
Thank you for the help!
Enrico
I don't know what the XilEnableNestedInterrupts() and
XilDisableNestedInterrupts() calls do, but have never had to use them
myself to use nested interrupts.
Have you read the section on interrupts on the following page:
http://www.freertos.org/Using-FreeRTOS-on-Cortex-A-Embedded-Processors.html
- in particular make sure the vApplicationIRQHandler() function is
enabling interrupts again before calling the handler installed for the
interrupt.
Hi!
Thanks for your answer.
I knew that page and I read the section on interrupts.
I do not have the function vApplicationIRQHandler() but I have another similar function that does similar things.
~~~
void FreeRTOSApplicationIRQHandler( uint32t ulICCIAR )
{
extern const XScuGicConfig XScuGicConfigTable[];
static const XScuGicVectorTableEntry *pxVectorTable = XScuGicConfigTable[ XPARSCUGICSINGLEDEVICEID ].HandlerTable;
uint32t ulInterruptID;
const XScuGicVectorTableEntry *pxVectorEntry;
/* The ID of the interrupt is obtained by bitwise anding the ICCIAR value
with 0x3FF. */
ulInterruptID = ulICCIAR & 0x3FFUL;
if( ulInterruptID < XSCUGIC_MAX_NUM_INTR_INPUTS )
{
/* Call the function installed in the array of installed handler functions. */
pxVectorEntry = &( pxVectorTable[ ulInterruptID ] );
pxVectorEntry->Handler( pxVectorEntry->CallBackRef );
}
}
~~~
It seems a bit different from the function shown in the link you provided, but I cannot re-define it in my application as it is not a weak function.
Am I missing something?
Thank you.
Enrico
That handler is not re-enabling interrupts, so if you want to you nested
interrupts you will have to re-enable interrupts in the handler function
itself (that is, the function called by
FreeRTOS_ApplicationIRQHandler()). Refer to the code on the page I
linked to before to see how interrupts are re-enabled if you are not sure.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.