Quality RTOS & Embedded Software

 Real time embedded FreeRTOS RSS feed 
Quick Start Supported MCUs PDF Books Trace Tools Ecosystem


Loading

Connecting STR9 with lwIP demo to internet

Posted by Anis Ben Abdallah on June 11, 2008
Hello,

Please I'm trying to connect an STR9 board runing the lwIP FreeRtos Demo to internet.
For this I'm using a Linksys Gateway which I have configured to forward incoming packet from internet to the board.
I used a dynamic DNS (dyndns.org) in order to have a hostname (mypagename.homeip.net)
Finally I have configured the gateway address on LwIP to be my Gateway lan address.

Locally I'm able to download the page when typing the page URL on my explorer but from outside this doesn't seem to work.

Do you know if there is any limitation in the http server provided with the demo? or is it performance issue with the STR9?

Or do I need to change anything in the LwiP options.

Thanks,
Anis

RE: Connecting STR9 with lwIP demo to internet

Posted by Dave on June 11, 2008
There are a number of things it could be.

Which port number are you using? If using the standard port 80 then check your ISP allows you to run servers. It might block port 80 access. If you are using a non standard port then check your firewall and router don't block access to non standard ports.

Whatever the problem is it is a networking issue, maybe in the configuration. If you can connect locally then its just a matter of hitting the right setup to be able to connect from externally.

RE: Connecting STR9 with lwIP demo to internet

Posted by Anis Ben Abdallah on June 11, 2008
Hi Dave,

Thanks for your answer.

As you mentionned it my ISP is blocking port 80, so I've used port 7777. In fact I've configured my gateway to forward any traffic with port 7777 to my STR9 board and with changing port to 80.

I've already tested that it works fine using an Apache webserver runing on ubuntu PC (it can be accessed from outside).

Anis





RE: Connecting STR9 with lwIP demo to internet

Posted by Richard on June 11, 2008
This is how I run the multiple servers I have in my office, different (external) WAN ports are re-directed to port 80 of various IP addresses on my LAN and it works ok.

Did you switch the Ubuntu PC off before you tried?

Regards.

RE: Connecting STR9 with lwIP demo to internet

Posted by Anis Ben Abdallah on June 11, 2008
Hi Richard,

I was running a windows session during my tests. Also in my gateway I have enabled only one forward to the STR9 board.

Regards,
Anis



RE: Connecting STR9 with lwIP demo to internet

Posted by Anis Ben Abdallah on June 12, 2008
Hi Guys,

Just I wanted to mention that I tried the STR9 uIP demo instead of the lwIP, and good news it worked!

Now the website can be accessed from internet. I need to investigate why it didn't work with lwIp demo.

Thanks for your help,
Anis


[ Back to the top ]    [ About FreeRTOS ]    [ Privacy ]    [ Sitemap ]    [ ]


Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.

Latest News

NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.

Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019

Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.

View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.


Careers

FreeRTOS and other embedded software careers at AWS.



FreeRTOS Partners

ARM Connected RTOS partner for all ARM microcontroller cores

Espressif ESP32

IAR Partner

Microchip Premier RTOS Partner

RTOS partner of NXP for all NXP ARM microcontrollers

Renesas

STMicro RTOS partner supporting ARM7, ARM Cortex-M3, ARM Cortex-M4 and ARM Cortex-M0

Texas Instruments MCU Developer Network RTOS partner for ARM and MSP430 microcontrollers

OpenRTOS and SafeRTOS

Xilinx Microblaze and Zynq partner