FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [June 2016 Threads] ISR Posted by michaeln32 on June 21, 2016 Hi
Can you please tell me the next questions :
1.What is System_Tick() interrupt priority in FREE RTOS ?
2.What is the range of Tasks priority in Free RTOS ?
3.What is the range of ISR priority in Free RTOS ?
4.Can in use librery functions in ISR ( for example memset in ISR) ?
Thank You
Michael
ISR Posted by rtel on June 21, 2016 Which port are you using?
ISR Posted by michaeln32 on June 22, 2016
ISR Posted by rtel on June 22, 2016 I meant which MCU and compiler are you using FreeRTOS with?
ISR Posted by michaeln32 on June 22, 2016 I am using MCU STM32F205RC.
Compiler: I am using Atollic
ISR Posted by rtel on June 22, 2016
1.What is System_Tick() interrupt priority in FREE RTOS ?
Search for configKERNELINTERRUPTPRIORITY on this page http://www.freertos.org/RTOS-Cortex-M3-M4.html and other pages on the website.
2.What is the range of Tasks priority in Free RTOS ?
http://www.freertos.org/RTOS-task-priority.html
3.What is the range of ISR priority in Free RTOS ?
That depends on the MCU as not all Cortex-M devices have the same priority ranges. See the link posted in answer to question 1 and the user manual for your STM32.
4.Can in use librery functions in ISR ( for example memset in ISR) ?
That depends on the library function. Juse when writing a bare metal application (with no OS) callilng memset() should be fine, but calling something like malloc() or printf() would be a very bad idea.
ISR Posted by michaeln32 on June 22, 2016
ISR Posted by michaeln32 on July 19, 2016 Hi
I am using MCU STM32F205RC.
Compiler: I am using Atollic
FreeRTOS V8.2.1
I have some questions:
- Is it possiable that ISR1 is stop running (preempted) by another ISR2 (when ISR2 have higher preority than ISR1) ?
- Is it possiable that ISR1 is stop running (preempted) by another ISR2 (when ISR2 have lower preority than ISR1) ?
- Is it possiable that ISR1 is stop running (preempted) by another ISR2 (when ISR2 have the same preority than ISR1) ?
Thank You
ISR Posted by rtel on July 19, 2016 These are questions about the hardware, the answers to which are in the ARM documentation.
An interrupt can itself only be interrupted by another interrupt if that other interrupt has a higher priority.
ISR Posted by michaeln32 on July 19, 2016 Thanks !
Can you please tell me what is the use of those functions
portSETINTERRUPTMASKFROMISR();
portCLEARINTERRUPTMASKFROMISR();
ISR Posted by michaeln32 on July 19, 2016 System Tick has higher priorty than ISR's.
Can System Tick preempt ISR's ?
How can I avoid race condition between ISR's ?
Is it by using portSETINTERRUPTMASKFROMISR ?
Thanks
ISR Posted by edwards3 on July 19, 2016
portSETINTERRUPTMASKFROMISR();
portCLEARINTERRUPTMASKFROMISR();
These are the equivalent of taskENTERCRITICAL() and taskEXITCRITICAL() for us in ISRs and are used to avoid race conditions. You can call taskENTERCRITICALFROMISR() and taskEXITCRITICALFROMISR() too which makes this more obvious. You will find examples of how the functions are used inside the queue.c file.
Can System Tick preempt ISR's ?
System tick is an ISR so I think this has already been answered. Normally the system tick is the lowest priority ISR.
ISR Posted by michaeln32 on July 21, 2016 I never use the function memcpy in ISR.
But i use in in tasks.
Is it good or is it bad to use critical section with memcpy in tasks ?
For example :
portENTER_CRITICAL();
memcpy(&I2, &I1, sizeof(I1_FLSMsrEvnt));
portEXIT_CRITICAL();
ISR Posted by rtel on July 21, 2016 memcpy() itself does not need a critical section. The only time you
would need a critical section is if the buffer being memcpy'ed to or
from could be accessed by another task while the memcpy operation was in
progress.
If there are any occasions that you need to use a critical section in an
interrupt then use taskENTERCRITICALFROMISR() and
taskEXITCRITICALFROMISR() in place of taskENTERCRITICAL() and
taskEXITCRITICAL(). See
http://www.freertos.org/taskENTERCRITICALFROMISRtaskEXITCRITICALFROMISR.html
for information on how to use the _FROMISR() versions.
ISR Posted by michaeln32 on July 21, 2016 Thank You.
Is a local variable of task remains his value after context switch to another task and back or the local variable of a task reinitilized to his original value ?
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|