FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2006 Threads] WizNET demo with Keil tools?Posted by Nobody/Anonymous on March 11, 2006 I want to use FreeRTOS WIZnet application on a LPC2106 with the KEIL uVision3 tools.
Can you tell me how I can switch from GCC to the Keil tools?
RE: WizNET demo with Keil tools?Posted by Nobody/Anonymous on March 12, 2006 The easiest way of achieving this would be to start with the Keil demo application from the FreeRTOS download, remove the demo application files from the project, change the target to LPC2106, then copy the WizNET source code into the project. You will have to change the ISR syntax to that as demonstrated by the Keil demo (look at the Keil UART driver to see the syntax required).
Make sure the startup code you use leaves the processor in Supervisor mode when main() is called!
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|