FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2007 Threads] PC port error'sPosted by Nobody/Anonymous on March 1, 2007 Hello,
I'm a newbie to FreeRTOS, and I compiled it OK, and used a clean disk with FreeDOS (only to boot, without autoexec/config.sys) and running RTOSDEMO.exe compiled. I'm using an Compaq Armada E500 to test it, with LED's in Paralel Port, and pins 2-3 of COM1 connected. Without any code changes I get this errors:
Maths task 4 failed. Maths task 3 failed. Maths task 4 failed. Maths task 3 failed. (etc)
I change in FreeRTOSConfig.h the settings to: #define configTICK_RATE_HZ ( ( portTickType ) 200 ) #define configUSE_16_BIT_TICKS 0
I can get about 10 OK's, but then I start messing up, saying:
Maths task 4 failed. Maths task count unchanged! Maths task count unchanged! (etc)
Whats wrong? Thanks,
jS
RE: PC port error'sPosted by Nobody/Anonymous on March 2, 2007 From the docs: "When using Open Watcom, the NO87 environment variable must be defined". Have you type
SET NO87=1
before running the exe?
RE: PC port error'sPosted by Nobody/Anonymous on March 2, 2007 Hello,
I've didn't checl that, where is that information? I've done it, and now it seams to be working ok, thanks.
jS
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|