FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2015 Threads]
I am evaluating the Renesas RX range processors for a new project.
For that I am using the RX632N on the RX63N-256KB Starter Kit.
I am trying to find a simple demo program to get Free RTOS running on the board.
There are many references to that board on your website but I cannot find an link to a demo project.
Does such a demo exist?
I am using Renesas e2 studio 3.1.3.06.
Your help would be appreciated.
Regards
Hans
There are RX62N and RX63N projects - but they pre-date e2studio. There is however an RX64M project that uses e2studio.
You could either convert a HEW RX62N project to e2studio, create an e2studio project from scratch for it, or re-target the RX64M e2studio project to your hardware. Note the 64M demo uses a different port layer to the 62 and 63N demos.
Each demo has a documentation page that contains a "source code organisation" section that tells you where to find the project in the main FreeRTOS .zip file download.
The list of documentation pages for the RX is here: http://www.freertos.org/a00090.html#RENESAS
The link to the main FreeRTOS .zip file download is here: http://www.freertos.org/a00104.html
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.