FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2016 Threads]
I am finding the I cannot get a IP address from the DHCP server because I am not receive any packets.
From this description it sounds like the fact you are not receiving
packets is the issue, not DHCP.
The project has been tested on two different Zynq hardware platforms -
ZC702 and MicroZed. Are you using one of these? If not, perhaps the
PHY on your hardware is different and some changes are required to the
init code?
How far have you got? Do you see packets leaving the device? When a
packet arrives at the device, is an interrupt generated and does the
MAC/Ethernet interrupt handler execute? If the Ethernet ISR does
execute, is it finding the received packet correct, and is the packet
sent into the TCP/IP stack correctly?
Sorry - just noticed you already said ZC702 - this is the hardware I
have myself. The other questions are still relevant though.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.