FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [March 2016 Threads] UART can't send correct data in low power mode on stm32l151Posted by hmtsai on March 17, 2016 I want to use uart function on STM32l151. It is ok when MCU run in normal mode. When I set configUSETICKLESSIDLE is 1. The uart can't send the correct data to pc terminal. I use oscilloscope to check uart data timing. If it is normal, the timing is ok. If it is wrong, the time is 1.5 times as long as the normal time. How do I check low power mode process?
Thanks
UART can't send correct data in low power mode on stm32l151Posted by rtel on March 17, 2016 You would have to check the device data sheet to see the effect on the UART of entering low power mode (for example, its clock may stop), and how long it takes to exit low power mode. However it might be easier just to not enter low power mode while the UART is in use. You can use the pre and post sleep macros to abort entering low power mode.
UART can't send correct data in low power mode on stm32l151Posted by hmtsai on March 17, 2016 I don't implement the MCU low power mode in FreeRTOS yet. I only use the default portSUPPRESSTICKSAND_SLEEP. Could it affect the uart?
Thanks
UART can't send correct data in low power mode on stm32l151Posted by rtel on March 17, 2016 Evidence would seem to show that something is effecting the UART -
whether that is software or hardware I can't say. Is the UART interrupt
driven?
UART can't send correct data in low power mode on stm32l151Posted by hmtsai on March 17, 2016 I only use USARTSendData. It is one byte function from STM32l151 driver. The timing is wrong in low power mode. Uart has the interrupt to MCU.
If the configUSETICKLESS_IDLE is 0, the uart function is ok. So I thing software maybe be the answer. I want to find where could effect the uart.
UART can't send correct data in low power mode on stm32l151Posted by hmtsai on March 21, 2016 Sorry. I found the wrong. The system clock is difference between in the low power mode and in normal mode.
Thanks
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|