FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2009 Threads] How to move flash int vectors to ram?Posted by francis wang on September 15, 2009 I am currently trying to move the oringin flash interrupt vectors to ram in LPC2214. I copy 64 bytes of data from the 0x00 to 0x3F to the ram address 0x40000000 to 0x4000003F and set the memmap to 0x02. But when I test the code it fails. It reports a error from the addr 0xFFFFF0C0 , which may caused by the manually change of the code LDR PC,[PC,-0x0FF0] to LDR PC,=0xFFFFF0C0.
Regards! wFrancis
RE: How to move flash int vectors to ram?Posted by MEdwards on September 15, 2009 I would recommend asking your question on the LPC2000 Yahoo group. It is very active and a good source of LPC2000 info.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|