FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2009 Threads] Interrupts enabled during system initPosted by jdabbs003 on September 4, 2009 Hello. Our system boots, sets up the hardware, creates FreeRTOS tasks and queues, then starts the scheduler. The intent is that interrupts are disabled until the tasks start. However, FreeRTOS is enabling interrupts almost immediately because of the way critical sections work.
There are several ways to fix this. But, is there a "right" way?
RE: Interrupts enabled during system initPosted by Richard on September 4, 2009 Most if not all ports should do the opposite to what you describe. Which port is it you are using?
Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|