|
|||||||||||||||
FreeRTOS Support ArchiveThe FreeRTOS support forum is used to obtain active support directly from Real Time Engineers Ltd. In return for using our top quality software and services for free, we request you play fair and do your bit to help others too! Sign up to receive notifications of new support topics then help where you can.
Loading
TCP/IP issue on STR912Posted by Rickey Leung on September 7, 2009 I am using uIP on STR912, connected with a PC/104AB control board. there are 4 motor encoders data-in from PC/104AB to the main board. I use the TCP/IP protocol to get the Encoder values from the data bus, but I encounter the problem: The Encoder reading task runs every 10ms, it returns correct value while the motor is running. The TCP/IP task starts every 0.5 sec. once the task starts, the value from Encoder is boomed to an abnormal one. Anyone here met this problem before? Thanks, Rickey RE: TCP/IP issue on STR912Posted by Dave on September 7, 2009 As you are the only person with your application it is not likely that anybody else with of seen it behave like that.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|
|||||||||||||||
NXP tweet showing LPC5500 (ARMv8-M Cortex-M33) running FreeRTOS.
Meet Richard Barry and learn about running FreeRTOS on RISC-V at FOSDEM 2019
Version 10.1.1 of the FreeRTOS kernel is available for immediate download. MIT licensed.
View a recording of the "OTA Update Security and Reliability" webinar, presented by TI and AWS.
FreeRTOS and other embedded software careers at AWS.
