FreeRTOS Support Archive
The FreeRTOS support forum is used to obtain active support directly from Real
Time Engineers Ltd. In return for using our top quality software and services for
free, we request you play fair and do your bit to help others too! Sign up
to receive notifications of new support topics then help where you can.
This is a read only archive of threads posted to the FreeRTOS support forum.
The archive is updated every week, so will not always contain the very latest posts.
Use these archive pages to search previous posts. Use the Live FreeRTOS Forum
link to reply to a post, or start a new support thread.
[FreeRTOS Home] [Live FreeRTOS Forum] [FAQ] [Archive Top] [September 2013 Threads] lpc2387 usb not working with freertosPosted by Pravin Saini on September 13, 2013 Hi,
I have been trying to implement virtual com port using lpc2387. I started with lpc code bunlde for keil .It works fine there. But,when I try to do the same with Free rtos had no success.I found that my usb isr is not getting called. I have tried writing ISR handlers as per the demo code but no success.
Thanks .
RE: lpc2387 usb not working with freertosPosted by Richard on September 14, 2013 ...in which case you may find the USB stack is the same one use as in this project. If so you can use it as a reference for your project as, although it is running on an LPC chip, it is a Cortex-M chip rather than an ARM7. Hope that helps. Regards.
lpc2387 usb not working with freertosPosted by saini7pravin on September 20, 2013 Hi,
Can I have a freertos usb cdc demo for arm7 (lpc23xx) keiluv.
thanks.
lpc2387 usb not working with freertosPosted by richardbarry on September 20, 2013 You can convert the Cortex-M version to your chip, find one on the Internet, get one from NXP, .... or purchase a commercial USB stack (in which case you would require OpenRTOS rather than FreeRTOS).
Regards.
Copyright (C) Amazon Web Services, Inc. or its affiliates. All rights reserved.
|